Netshop - Racks, Cabinets and Ethernet Network Cabling Supplies
No items currently in your cart

SUB TOTAL:£ 0.00

Effective Thursday 29 August, Netshop will no longer be supporting payments by credit card.
For any questions, please call Netshop on 01276 405790 or email [email protected].

PoE Tester IEEE802.3at/af

PoE Tester IEEE802.3at/af

PoE Tester IEEE802.3at/af

£exc. VAT

£exc. VAT

£27.10exc. VAT

Part No: POETESTER


    Print

    PoE Tester IEEE802.3at/af

    PLANET POE-TESTER is an easy-to-use PoE diagnostic adapter for network installers, company MIS and even home users to quickly identify the existence of Power over Ethernet on applications network. It is designed to detect if the IEEE 802.3af/at PoE voltage runs over the UTP cable and identify the type of PSE (Power Source Equipment) for troubleshooting.

    Simply connect the POE-TESTER to the PSE or the RJ-45 outlet and the LED will light up when it detects the PoE voltage via the UTP cable and identifies the PSE to be mid-span, end-span, or even the latest 4-pair 60-watt ultra PoE in a second.

    The POE-TESTER provides two LEDs for quick and easy PSE mode identification. A Power over Ethernet system comprises a PSE (Power Sourcing Equipment) and a PD (Powered Device). The PSE is a device that will provide power in a PoE setup. There are two types of PSE, Mode A and Mode B. The PSE may either be a Mode A, end span PoE switch or a Mode B, mid-span PoE injector.

    Although PDs that implement only Mode A with end-span or Mode B with mid-span are disallowed by the IEEE 802.3af/at standard, there are still some of the PDs that are designed to work with only one of the modes. Thus, it will cause the PoE PSE and PD not to be compatible with each other in the applications. For example, an end span designed PoE switch cannot power on the remote mid-span only wireless access point. But most of the time, the installers would not exactly know what the remote PSE devices are. PLANET POE-TESTER checks your UTP cable for power and identifies its source, mid-span or end-span. Make sure at the end of UTP cable there is existence of PoE, and then the next step is to check if the PD is compatible with the PSE, or it is a malfunctioned PD.

    Quickly tests RJ-45 outlet for Power over Ethernet existence
    Two LEDs indicate the types of PSE (power source equipment)
    End-span PoE switch
    Mid-span PoE injector / injector hub
    4-pair, 60-watt ultra PoE injector
    Compliant with IEEE 802.3at/af Po E standard
    Compact size, Plug and Play design

    SEE TECHNICAL DATA SHEET FOR FULL DETAILS

    • Product Type: PoE Tester

    You may also like